Pump Solutions Group Neptune Polymaster Liquid Polymer Blend & Feed System - Manual (Page 21)

16
Polymaster
®
P.O. Box 247 Lansdale Pa. 19446
Phone 215-699-8700 Fax 800-255-4017
Pression D'eau
Maximum
Température
Maximale
P/N 107807
www.neptune1.com
A COMPANY
Model No. Serial No.
Manufactured Under U.S. Patents:
4,793,713 4,886,368 5,511,877
Max Water
Pressure
Max
Temperature
100 psi 120° F
7 bar 49° C
RECOMMENDED SPARE PARTS
Polymaster unit 120 volt Kit No. 003896 Contains: (3) replacement fuses
(3) spare indicating lamp bulbs
(1) spare Gatlin mechanical seal
(1) spare polymer injection valve
Polymaster unit 220 volt Kit No. 003866 Contains:
(3) replacement fuses
(3) spare indicating lamp bulbs
(1) spare Gatlin mechanical seal
(1) spare polymer injection valve
Chemical Metering Pump Refer to specific pump manual
(1) spare parts kit as recommended by
pump manufacturer
Accessories
1” Poly y-strainer Part Number 107825
½” Poly y-strainer Part Number ST-PVC
Vacuum Hand Pump Part Number 108233
PARTS ORDERING INSTRUCTIONS
The complete model number and serial number of the Polymaster must be furnished to insure prompt and accurate
parts service. These numbers are found on the name plate (sample below) located on the front panel.
Send all orders or inquiries for parts to:
Parts Department
Neptune Chemical Pump Company
P.O. Box 247
Lansdale, PA 19446
Tel.: 215-699-8700
1 -888-3NEPTUNE (888-363-7886)
FAX: 215-699-0370
Email: www.
[email protected]
Shipping Address:
Any material returned to Neptune must first have an RMA# as described in the beginning of this manual.
Neptune Chemical Pump Co.
204 DeKalb Pike
Lansdale, P A 19446