Extron Electronics VSC 75 User Guide - Manual (Page 17)

VSC 75 Specifications VSC 75 Specifications
Specifications, cont’d
A-3
Specifications
A-2
Video input
Number/signal type ................... 1 VGA, 1 Mac analog RGBHV, RGBS,
RGsB
Connectors .................................... VGA ........................... 15-pin HD female
Mac ............................ 15-pin D female
Nominal level(s) .......................... Analog — 1V p-p
Minimum/maximum level(s) .... Analog — 0V to 2V p-p with no offset
Impedance .................................... 75 ohms or high Z (DIP switch selectable)
Horizontal frequency .................. Autoscan 24 kHz to 70 kHz
Vertical frequency ....................... Autoscan 50 Hz to 120 Hz
Resolution range .......................... Autoscan 560 x 384 to 1280 x 1024
Note: 1280 x 1024 is available at 60 Hz
only
Video processing
Encoder ......................................... 10 bit digital
Digital sampling .......................... 24 bit, 8 bits per color; 50 MHz standard
Colors ............................................ 16.8 million
Horizontal filtering ...................... 1 level
Vertical filtering ........................... 2 levels (selectable)
Video output
Number/signal type ................... 1 S-video .................... NTSC 15.75 kHz,
525/625 lines, or PAL, 15.5 kHz, 625 lines
1 composite video — NTSC 15.75 kHz,
525 lines, or PAL 15.5 kHz, 625 lines
Connectors ................................... S-video ....................... 1 4-pin mini-DIN
female
Composite video ..... 1 BNC female
Nominal level ............................... 1V p-p
Impedance .................................... 75 ohms
Sync
Input type ..................................... Autodetect RGBHV, RGBS, RGsB
Standards ...................................... NTSC 3.58, PAL
Input level ..................................... 1.5V to 5V p-p
Input impedance .......................... 75 ohms
Control/remote — scan converter
Serial control port ........................ RS-232, 9-pin female D connector
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations ... 2 = TX, 3 = RX, 5 = GND
Program control .......................... Extron’s control program for Windows®
Extron’s Simple Instruction Set™ – SIS™
General
Power ............................................. 100VAC to 240VAC, 50/60 Hz, 40 watts,
internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount ................................... Yes, with optional rack shelf,
part number 60-190-01
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.75" H x 8.75" W x 9.50" D
4.45 cm H x 22.23 cm W x 24.13 cm D
Shipping weight ........................... 5 lbs (2.3 kg)
Vibration ....................................... NSTA 1A in carton (National Safe Transit
Association)
Approvals ..................................... UL, CE, FCC Class A
MTBF ............................................. 30,000 hours
Warranty ....................................... 2 years parts and labor
Specifications are subject to change without notice.