Extron Electronics VTG 200 User Guide - Manual (Page 6)

Extron • VTG 150 & VTG 200 • User’s Manual
2
Chapter Two
Connecting the VTG
Output Cables
15-Pin HD (VGA/XGA) Output
15-Pin Apple/Mac II (VTG 150), MacII/Quadra (VTG 200) Output
9 Pin, TTL Output
RGB Output (BNC, Analog)
NTSC/PAL BNC Output (VTG 200 only)
13W3 Sun/SGI/IBM Output (VTG 200 only)
Adapting the VTG 150 to Other Standards
Extron VTG 150 & VTG 200
User’s Manual
Page 1-3
Introduction
Video output
Number/signal type
VTG 150 ................................... 1 RGBHV, RGBS, RGsB, RsGsBs
VTG 200 ................................... 1 RGBHV, RGBS, RGsB, RsGsBs, NTSC/PAL
composite video
Connectors
VTG 150 ................................... 5 BNC female, 1 15-pin HD female, 1 15-pin
D female, 1 9-pin D female
VTG 200 ................................... 5 BNC female, 1 BNC female, 1 15-pin HD
female, 1 15-pin D female, 1 13W3 D
female, 1 9-pin D female
Rates
VTG 150 ................................... VGA-UXGA, Apple/Mac/Quadra, TTL,
HDTV
VTG 200 ................................... VGA-UXGA, Apple/Mac/Quadra, Sun/
SGI/NeXT/IBM Power PC, TTL, HDTV
Maximum level ............................ 1V p-p
Impedance ..................................... 75 ohms
Return loss .................................... -30dB @ 5 MHz
DC offset ........................................ ±5mV maximum
Control/remote — test generator (VTG 200 only)
Serial control port ....................... RS-232, 9-pin female D connector
Baud rate and protocol .............. 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations
2 = TX, 3 = RX, 5 = GND
Program control ........................... Extron’s control program for Windows®
Extron’s Simple Instruction Set™ – SIS™
Extron’s Advanced Instruction Set™ –
AIS™
General
Power ............................................. 100VAC to 240VAC, 50/60 Hz, 9 watts,
VTG 150 ................................... external, auto-switchable; to 9.0VDC, 0.6 A
VTG 200 ................................... internal, auto-switchable
Temperature/humidity ............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount ................................... No
Enclosure type ............................. Metal
Enclosure dimensions
VTG 150 ................................... 4.7" H x 4.6" W x 1.7" D
11.9 cm H x 11.7 cm W x 4.3 cm D
(5.5” (14 cm) H includes connectors)
VTG 200 ................................... 6.3" H x 9.0" W x 2.0" D
16.0 cm H x 22.9 cm W x 5.1 cm D
(7.0” (17.8 cm) H including connectors.)
Product weight
VTG 150 ................................... 1.7 lbs (0.8 kg)
VTG 200 ................................... 3.3 lbs (1.5 kg)
Shipping weight
VTG 150 ................................... 4 lbs (1.8 kg)
VTG 200 ................................... 7 lbs (3.2 kg)
Vibration ........................................ ISTA/NSTA 1A in carton (International
Safe Transit Association)
Listings ........................................... UL, CUL
Compliances ................................. CE, FCC Class B
MTBF .............................................. 30,000 hours
Warranty ........................................ 3 years parts and labor
Specifications are subject to change without notice.