Extron Electronics SW2 VGA DA2 AF R User Guide Rev. A - Manual (Page 7)

SW2 VGA DA2 AF R • Installation and Operation SW2 VGA DA2 AF R • Installation and Operation
Installation and Operation, cont’d
Mounting the SW2 VGA DA2 AF R
When mounting the switcher, take cabling and power
availability into consideration. Select either rack mounting
using the included VersaTools
® rack mount kit, or under-desk
mounting using the optional mounting kit. Follow the
appropriate installation steps on the following pages.
Rack mounting
1. If feet were previously installed on the bottom of the
switcher, remove them.
2. Attach the provided rack mounting brackets
(part #70-485-01) to the switcher with machine screws, as
shown in the following illustration.
3. Secure the switcher to the rack using the supplied machine
screws.
UNSWITCHED
10 0-2 40 0. 5A M AX .
AU TO SW ITC H
AC TIV E
SW 2 VG A DA 2 A F R
1
2
IN PU T 1
Rack mounting
2-5
Adapter Plate
Adapter Plate
Tighten nuts
securely
Routing adapter output cables and
attaching adapter plate
6 . Replace the top cover on the switcher, and fasten it with
the screws removed in step 2.
2-4