Extron Electronics RGB 168xi VGA User Guide - Manual (Page 17)

RGB 138xi xi xi xi xi, RGB 168xi xi xi xi xi Specifications
Specifications, cont’d
RGB 138xi xi xi xi xi, RGB 168xi xi xi xi xi Specifications A-3
Specifications
A-2
Video
Gain ................................................ Unity, (0.725V p-p) 50% peaking, (0.75V p-
p) 100% peaking
Bandwidth ..................................... 300 MHz (-3dB)
Video input
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors ................................... RGB 138xi .................. 1 9-pin D male,
MBC/LBC cable or buffer
RGB 168xi ..................... 1 15-pin HD female
Minimum/maximum levels ....... Analog ....................... 0.3V to 1.5V p-p
with no offset at unity gain
Impedance .................................... 75 ohms or Hi Z, switchable (The default
is Hi Z.)
Horizontal frequency .................. Autoscan 15 kHz to 130 kHz
Vertical frequency ....................... Autoscan 30 Hz to 120 Hz
Return loss .................................... -30dB @ 5 MHz
Maximum DC offset .................... 4.0V
Video output
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB
Connectors
RGB 138xi .......................... 6 BNC female
RGB 168xi .......................... 6 BNC female
1 15-pin HD female local monitor output
(buffered)
Minimum/maximum levels ....... Analog ....... 0.7V to 0.75V p-p with 0.70V
p-p input
Impedance .................................... 75 ohms
Return loss .................................... -30dB @ 5 MHz
Sync
Input type ..................................... RGBHV TTL (±), RGBS TTL (±), RGsB 0.3V
(-), RsGsBs 1.3V (-)
Output type .................................. RGBHV (±), RGBS(±), RGsB (-)
Input level ..................................... 2V to 5.5V p-p with ±0.2VDC offset (max.)
Output level .................................. 4V to 5V p-p
Input impedance .......................... 10 kohms
Output impedance ....................... 75 ohms
Max. propagation delay .............. 48 nS
Max. rise/fall time ....................... 3.5 nS
Polarity .......................................... RGBHV ...................... when RGBHV is
input, polarity
follows input;
otherwise negative
RGBS, RGsB .............. negative
Audio
Gain ................................................ Unbalanced 0dB, balanced +6dB
Frequency response .................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated
maximum output drive
S/N ................................................ >90dB at rated maximum output (14dBu),
balanced
Stereo channel separation .......... >95dB @ 1 kHz to 20 kHz
Audio input
Number/signal type ................... 1 PC level stereo, unbalanced
Connectors ................................... 1 3.5 mm stereo jack, 2 channel; tip (L),
ring (R), sleeve (ground)
Impedance .................................... >10 kohms, DC coupled
Maximum level ............................ +8.5dBu, (unbalanced) @ stated %THD+N
Audio output
Number/signal type ................... 1 stereo (2 channel), balanced/unbalanced
Connectors ................................... 3.5 mm stereo captive screw connector, 5
pole, for left and right output
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ..................................... ±0.1dB channel to channel
Maximum level (600 ohm) ......... +14dBm, balanced at stated %THD+N
General
Power ............................................ 100VAC to 240VAC, 50/60 Hz, 15 watts,
internal, auto-switchable
MBC power jack .......................... 9.0VDC, 150 mA
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount .................................. Yes, with included kit #70-077-03
Furniture mount .......................... Yes, with optional kit #70-077-01 (under
desk) or
included kit #70-077-03 (through desk/
rack mount)