Mounting, Setup checklist: how to proceed with installation, Mlc 104 ip plus series • setup guide (continued) – Extron Electronics MLC 104 IP Plus Series Setup Guide User Manual
Page 6
MLC 104 IP Plus Series • Setup Guide (Continued)
Mounting
Attach cables using the preceding pages
as a guide, then securely mount the
MLC and other devices into the wall
or furniture. Optional mounting kits
(see part numbers at right) are
available for use with the MLC. Read
the instructions and UL guidelines
that come with the any mounting kit
for installation procedures.
Optional mounting kits
Part number
SMB 102 Two-gang Surface Mount Box (black)
60-640-02
SMB 104 Four-gang Surface Mount Box (black)
60-642-02
MLM 104 6GWP Six-Gang Wall Mounting Kit (black)
70-355-02
MLM 104 L Replacement Lectern Mounting Kit (black, white)
70-357-02, -03
MLM 104 LAAP Replacement Lectern Mounting Kit with AAP
opening (black )
70-358-02
Setup Checklist: How to Proceed With Installation
Get Ready
Familiarize yourself with the features of the MLC 104 IP Plus.
Download and install the latest version of the Extron Global Configurator (GC) software and the latest driver
package (avail able from
or on the Extron Software Products Disc.)
Obtain IP setting information for the MLC from the network administrator.
Obtain model names and setup information for devices the MLC will control.
Perform Physical Installation
Mount the unit.
Cable devices to ports on the MLC.
Connect power cords and turn on the devices in the following order: output devices (projectors, monitors,
speakers), the MLC, a PC (for setup), SCP panel (if desired), then all input devices (such as DVD players).
Configure the MLC
Connect the PC and the MLC to the same Ethernet subnetwork and use ARP via Telnet, Extron DataViewer, or a
similar application to configure the MLC for network communication.
Create a new GC project and configure the MLC. See the Global Configurator Help file.
Test the system.