Extron Electronics MDA 4V SDI User Guide - Manual (Page 5)

MDA 4V HD-SDI and SDI User's Guide • Introduction
MDA 4V HD-SDI and SDI User's Guide
MDA 4V HD-SDI and SDI User's Guide • Introduction MDA 4V HD-SDI and SDI User's Guide • Installation MDA 4V HD-SDI and SDI User's Guide • Installation
The MDA 4V HD-SDI accepts high definition serial video with
data rates of 1.485 Gbps and 2.97 Gbps, and standard definition
serial video at a data rate of 270 Mbps.
The MDA 4V SDI accepts SMPTE-259M serial video on a female
BNC connector. The MDA 4V SDI recognizes the 4f
sc
PAL, 4f
sc
NTSC, component 4:2:2, and Widescreen 4:2:2 standards.
Both MDAs receive the video on a female BNC connector. Both
MDAs have automatic equalization and re-clocking capabilities.
The rack-mountable MDAs ship with an external 12 V power
supply.
Installation
The 1U high, quarter rack width, MDAs can be mounted on a
rack shelf, behind a rack, or under a desk or tabletop..
Rack mounting
For optional rack mounting, mount the MDA with any of the
following rack shelves:
• RSF 123 VersaTools ® rack shelf kit (part #60-190-20)
(figure 3 on the next page)
• RSB 123 VersaTools rack shelf (part #60-604-20)
• RSU 126 6" deep universal rack shelf kit (part #60-190-10)
• RSB 126 6" deep basic rack shelf (part #60-604-10)
• RSU 129 1U universal rack shelf kit (part #60-190-01)
(figure 4 on the next page)
• RSB 129 1U basic rack shelf (part #60-604-01)
(2) 4-40 x 3/16"
Screws
Use 2 mounting holes on
opposite corners.
VersaTools Rack Shelf
1/4 Rack Width Front
False Faceplate
Figure 3 — Mounting the MDA on a VersaTools shelf
DIST RIB UTIO N A MPL IFIE R
DIST RIB UTIO N A MPL IFIE R
DIST RIB UTIO N A MPL IFIE R
MDA SER IES DIST RIBU TION AMP LIFIE R
Figure 4 — Mounting the MDA on a standard shelf