Extron Electronics MDA 4V EQ User’s Manual - Manual (Page 15)

Installation and Operation, cont’d
VersaTools ® MDA EQ Series • Installation and Operation
MDA EQ Series
A
Appendix A
Specifications, Parts, and
Accessories
Specifications
Models
Included Parts
Optional Accessories
2-14
INPUT
LOOP-THRU
OUTPUTS
HIGH Z
IN
75 Ohm
INPUT OUTPUTS
IN
GAIN GAIN GAIN GAIN
S-VIDEO DISTRIBUTION AMPLIFIER
1/2
GAIN GAIN
C
GAIN GAIN EQ
Y
GAIN GAIN GAIN GAIN EQ
Y C
3/4
1 3 4 4 3
MDA 4SV EQ
1 Power indicator LED — This LED, when lit, indicates that the
MDA EQ is receiving power.
2 Gain and Equalization potentiometers — (One set for each
output for MDA 2V and 4V EQ; one set for each pair of outputs
for MDA 4SV EQ) Use an Extron Tweeker (provided) or other
small screwdriver to rotate these potentiometers to adjust the
gain and equalization for optimization of the image over the
output cable.
3 Gain and Equalization potentiometers (luma ) — (MDA 4SV
EQ only; one set for each pair of outputs) Use an Extron
Tweeker to rotate these potentiometers to adjust the luminance
gain and equalization for optimization of the image over the
output cable.
4 Gain potentiometer (chroma) — (MDA 4SV EQ only; one for
each pair of outputs) Use an Extron Tweeker or other small
screwdriver to rotate this potentiometer to adjust the chroma
gain for optimization of the image over the output cable'.