Product overview – Extron Electronics IN2118 User Manual

Page 4

Product Overview

DESCRIPTION

The IN2118 is a high performance computer video interface for analog video signals including
VGA, SVGA, XGA, SXGA, UXGA, Macintosh

, Sun

, SGI

and other high-resolution

workstations. The IN2118 flush mounts neatly in a conference room / boardroom table or other
presentation furniture. The IN2118 is a two-sided unit that provides easy access to a high-
resolution computer video interface, a modular A/V connector faceplate and / or one or two A/C
convenience outlets on either side of the table.

Disappearing Flush Mount Design - When the unit is in the lowered position, it sits

completely flush with the table surface.

Motorized Unit - can be raised and lowered by pressing down on the top surface, or via

contact closure control.

Safety Features - stop the interface from descending if it senses an obstruction such as

attached cables or wayward fingers.

Installation Flexibility - The IN2118 includes several adjustments to help installers

position the unit precisely in a conference table / presentation furniture.

Front Panel A/C Convenience Outlets - are provided to power a laptop computer or

other A/V equipment that will be located on the table.

Modular A/V Connector Plate - The IN2118 simplifies the design and installation pro-

cess since a single unit fills the function of both video interface and A/V connector plate.

Flush mounted in the table and rising into place when needed, the IN2118 provides easy access
for making computer and A/V connections, reducing equipment clutter, and complements the
décor of high tech control rooms, civic / legislative chambers and courtroom installations.

EIGHTEEN MODELS AVAILABLE

The IN2118 is available in several different combinations to match the computer video interface,
A/V connector and A/C power outlet requirements of each installation.

Faceplate A: 400 MHz Interface, holds (2) A/V Connector Modules & (1) Edison A/C Outlet
Faceplate D: 400 MHz Interface, holds (2) A/V Connector Modules & (1) IEC A/C Outlet
Faceplate G: 400 MHz Interface, holds (2) A/V Connector Modules & (1) Europlug A/C Outlet
Faceplate B: Holds (6) A/V Connector Modules & (1) Edison A/C Outlet
Faceplate E: Holds (6) A/V Connector Modules & (1) IEC A/C Outlet
Faceplate H: Holds (6) A/V Connector Modules & (1) Europlug A/C Outlet
Faceplate C: Holds (4) A/V Connector Modules & (2) Edison A/C Outlets
Faceplate F: Holds (4) A/V Connector Modules & (2) IEC A/C Outlets
Faceplate K: Holds (4) A/V Connector Modules & (2) Europlug A/C Outlets

Each unit can be ordered with any combination of two (2) faceplates. Complete descriptions of all
available models can be found on pages 26 & 27 of the INLINE 2001 Product Catalog.
Note: A/V Connector Modules are not included and must be ordered separately (see page 17).