Extron Electronics GLI 1000 15HD - Manual (Page 4)

GLI 1000 • Operation 7 GLI 1000 • Operation
Operation
6
4 Output connectors — Connect an RGBHV, RGBS, RGsB, RsGsBs,
component video display to the Output 15HD connector or with
an optional SY-VGA cable, connect one or two S-video display, or
up to five composite video displays
GLI 1000 2BNC
5 Video/Y and Video/C Input connectors — Connect an S-video
source or two composite video sources to the two Input BNCs
(figure 5).
6 Video/Y and Video/C Output connectors — Connect an S-video
display or two composite video displays to the two Output BNCs.
GLI 1000 2RCA
7 Video/Y and Video/C Input connectors — Connect an S-video
source or two composite video sources to the two Input RCA
connectors.
8 Video/Y and Video/C Output connectors — Connect an S-video
display or two composite video displays to the two Output RCA
connectors.
Specifications
Video
Gain ............................................... Unity
Bandwidth .................................... 1.0 GHz (-3dB)
CMRR ............................................ -60 dB @ 60Hz/50Hz
Video input
Number/signal type
GLI 1000 15HD ................. 1 analog VGA-XGA, RGBHV, RGBS, RGsB,
RsGsBs, or component video; or 2 S-video and 1
NTSC/PAL/SECAM composite video; or 1
S-video and 3 NTSC/PAL/SECAM composite
video; or 5 NTSC/PAL/SECAM composite video
GLI 1000 5BNC ................ 1 analog RGBHV, RGBS, RGsB, RsGsBs, or
component video; or 2 S-video and 1
NTSC/PAL/SECAM composite video; or 1
S-video and 3 NTSC/PAL/SECAM composite
video; or 5 NTSC/PAL/SECAM composite video
GLI 1000 2BNC/2RCA ... 1 NTSC/PAL/SECAM S-video or 2
NTSC/PAL/SECAM composite video
Connectors
GLI 1000 15HD ................. 1 female 15HD connector
GLI 1000 5BNC ................ 5 female BNCs
GLI 1000 2BNC ................ 2 female BNCs
GLI 1000 2RCA ................ 2 female RCA connectors
Minimum/maximum level(s) .... Analog -10.0V to +10.0V p-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency .................. 10 kHz to 200 kHz
Vertical frequency ....................... 15 Hz to 180 Hz
Video output
Number/signal type
GLI 1000 15HD ................. 1 analog VGA-UXGA, RGBHV, RGBS, RGsB,
RsGsBs, or component video; or 2 S-video and 1
NTSC/PAL/SECAM composite video; or 1
S-video and 3 NTSC/PAL/SECAM composite
video; or 5 NTSC/PAL/SECAM composite video
GLI 1000 5BNC ................ 1 analog RGBHV, RGBS, RGsB, RsGsBs, or
component video; or 2 S-video and 1
NTSC/PAL/SECAM composite video; or 1
S-video and 3 NTSC/PAL/SECAM composite
video; or 5 NTSC/PAL/SECAM composite video
GLI 1000 2BNC/ 2RCA .. 1 S-video or 2 composite video
Connectors
GLI 1000 15HD ................. 1 female 15HD connector
GLI 1000 5BNC ................ 5 female BNCs
GLI 1000 2BNC ................ 2 female BNCs
GLI 1000 2RCA ................ 2 female RCA connector
Minimum/maximum level(s) .... Analog -10.0V to 10.0V p-p with no offset
Impedance .................................... 75 ohms
Return loss .................................... Better than 30dB up to 100 MHz
Sync
Input/Output type
GLI 1000 15HD, 5BNC .... RGBHV, RGBS, RsGsBs, RGsB
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ..................................... 0.5V to 5.0V p-p
Output level .................................. TTL: 0V to 10.0V p-p
Input/Output impedance .......... 75 ohms
Polarity .......................................... Follows input
General
Power ............................................. Non-powered