Extron Electronics Fiber Optic Termination Kit - Manual (Page 4)

Fiber Optics Termination Kit • User Guide (Continued)
Extron USA - West
Headquarters
+800.633.9876
Inside USA and
Canada Only
+1.714.491.1500
+1.714.491.1517
FAX
Extron USA - East
+800.633.9876
Inside USA and
Canada Only
+1.919.863.1794
+1.919.863.1797
FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050
FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664
FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656
FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566
FAX
Extron Middle East
+971.4.2991800
+971.4.2991880
FAX
© 2011 Extron Electronics All rights reserved. www.extron.com
68‑2048‑01
Rev. A
03 11
Accessories
Description Part Number
QLC SM/10, Singlemode, (Qty. 10) 101‑017‑01
QLC MM/10, Multimode, (Qty. 10) 101‑018‑01
SM P/2K, plenum, 2 km (6,562 feet) spool 22‑223‑02
OM4 MM P/2K, plenum, 2 km (6,562 feet) spool 22‑225‑02
Included Parts
Description Part Number
Visual Fault Locator (VFL 101)
Cleaver with case
Fiber Stripper
Strip/Cleave Length Template
Cable Clamp
Cable Grip Assembly Tool
Kevlar Scissors
Fiber Preparation Fluid
Lint‑free Cloth Wipes
Marker Pen
Carrying Case
Fiber Optics Termination Kit User Guide
15. Trim excess strands using the Kevlar scissors.
16. Remove the cable clamp to complete the
termination.
17. Clean the work surface and properly dispose of
all scrap material.
Reuseable Connectors
The connectors can be used a second time. Replace the dust cover, then orient the wedge
clip so the position 1 indicator is towards the dust cover. Place the wedge clip back on by
reversing step 14. Squeeze the wedge down onto the connector until two distinct clicks
are heard. Unscrew the boot and pull it from the connector. The optic cable should easily
slide out and the connector is ready for a second use.
15