Extron Electronics Fox Tx_Rx AV User Guide - Manual (Page 24)

Command ASCII
Command
(host to unit)
Response
(unit to host)
Additional description
Information Request
General information
I 1Link X#• 2Link X#
• Vid X#• Aud X#
•X1!•X1@]
X# Link #1: active signal present (1)
or absent (0) •
X# Link #2: active signal present (1)
or absent (0) •
X# video output signal enabled (1)
or disabled (0) •
X# audio signal enabled (1) or
disabled (0) •
X1! SM or MM •
X1@ Tx or Rx
Query firmware (F/W) version Q x.xx ] Displays current F/W version.
Query all F/W versions 0Q x.xx-x.xx-x.xx-x.xx] Diplays information about all F/W
versions.
Query Factory F/W version 32Q x.xx ] Displays factory loaded F/W version.
Query updated F/W version 34Q x.xx ] Displays updated F/W version.
Query factory FPGA version 33Q x.xx ] Displays factory loaded Field
Programable Gate Array (FPGA)
version.
Query updated FPGA version 35Q x.xx ] Displays updated FPGA version.
Query part number N 60-941-zz ] Displays the unit's part number.
Query other unit part number 1N 60-941-zz ] Displays the part number of other
connected box.
Status Request
View link 1 Status
1S X#] Displays link 1 status (X#)
0 = active signal absent
1 = active signal present
View link 2 Status 2S X#] Displays link 2 status
View input video status 3S X#] Displays input video status
View input audio status 4S X#] Displays input audio status
View internal temperature 20S X1$] Displays internal temperature in
degrees F
Factory Defaults
System Reset (factory default)
E ZXXX } Zpx ] Resets unit to all factory default
values
Reset audio settings E ZA } Zpa ] Resets all audio settings to factory
default values
Reset presets E ZG } Zpg ] Rests all memory presets to factory
default values
FOX Tx/Rx AV • Configuration 18