Extron Electronics Fox Tx_Rx AV User Guide - Manual (Page 23)

Command ASCII
Command
(host to unit)
Response
(unit to host)
Additional description
Audio output level
Set to consumer level
40*0# Lvl0 Sets audio output to consumer level
(X*).
0 = Consumer level (-10 dBV) —
default.
1 = Professional level (+4 dBu).
Set to professional level 40*1# Lvl1 Sets audio output to professional
level.
View current output level status 40# X*] Displays current audio output level.
Auto Memory
Disable Auto Memory
55*0# Img0 ] Disables Auto Memory.
Enable Auto Memory 55*1# Img1 ] Enables Auto Memory.
View current Auto Memory
setting 55# X#] View the current Auto Memory
setting (X#)
0 = disabled; 1 = enabled.
Auto Image
Trigger
55*2# Img ] Returns video adjustments (color,
contrast, tint, and brightness) to
default values (64).
Test Pattern
Color bars
1J Tst1 ] Sets color bars test pattern on (X().
0 = test pattern off 1 = color bars
2 = grayscale 3 = alternating pixels
Grayscale 2J Tst2 ] Sets grayscale test pattern on.
Alternating pixels 3J Tst3 ] Sets alternating pixels test pattern
on.
Off 0J Tst0 ] Sets test pattern off.
View current test pattern status J X(] Displays current test pattern status.
Link #2 Transmission
Disable
66*0*0# Rle*0*0 ] Disables link #2. Link #2 status
(X1)):
0 = disables link #2 (receiver to
transmitter).
1 = enables link #2.
2 = enables receiver daisy chain
mode.
Enable 66*0*1# Rle*0*1 ] Enables link #2.
Daisy chain 66*0*2# Rle*0*2 ] Enables receiver daisy chain mode.
View current link #2 status 66*0# 0* X1)] Displays current link #2 status.
This command is only available on
the reciever unit; the transmitter
responds with an E14 error code.
FOX Tx/Rx AV • Configuration 17