Extron Electronics Fox Tx_Rx AV User Guide - Manual (Page 20)

X@ — Color, tint, contrast, or brightness adjustment (0 to 127)
X# — Auto Memory, blanking, or audio mute status
0 = disabled
1 = enabled
X$ — Output video type
0 = Follow input type
6 = Component
7 = S-video
8 = Composite
X% — Audio gain (0 to +10 dB)
X^ — Audio attenuation (-18 to 0 dB)
X& — Audio level (-18 to +10 dB)
X* — Audio output level
0 = Consumer level (-10 dBV) (default)
1 = Professional level (+4 dBu)
X( — Test pattern
0 = Test pattern off
1 = Color bars
2 = Grayscale
3 = Alternating pixels
X1) — Link #2 transmission status
0 = disables link #2
1 = enables link #2 from receiver back to transmitter
2 = enables daisy chain mode on receiver
X1! — SM (singlemode) or MM (multimode)
X1@ — Tx (transmitter) or Rx (receiver)
X1# — Memory presets (1 to 30)
X1$ — Internal temperature in degrees Fahrenheit and Celsius: (xxxF xxC)
Error messages
E10 — Invalid command
E13 — Invalid parameter
E14 — Not valid for this configuration
FOX Tx/Rx AV • Configuration 14