Extron Electronics FOX T USW 203 User Guide User Manual

Page 39

Plus Mode Transmission panel

Plus mode can support rates up to 1920x1200 @ 60Hz, with embedded audio, and is
HDCP compliant. Non-Plus mode supports rates up to 1600x1200 and 1080p, is HDCP
compliant, and does not contain embedded audio (analog audio is still supported).
In the Plus Mode Transmission panel, click the

Enabled

radio button to enable Plus mode.

To disable Plus mode, click the

Disabled

radio button.

NOTE: Default setting: Plus Mode is

Enabled

VGA Input Video Format panel

This setting selects RGB or YUV Input Video Format for the VGA input.

NOTE: Default setting: VGA Input Video Format is

Auto

Audio Input Selection panel

This panel sets the audio type for the VGA and HDMI inputs, or set them to

Auto

for

automatic selection.
For each input, select the desired audio input type from the

Input

drop-down list.

Figure 27.

Audio Input 1 Options

NOTE: Default setting: Audio Input Selection is

Auto

for all inputs.

Advanced Tab

Figure 28.

Advanced Tab

FOX T USW 203 Universal Switcher • FOX Extender Control Program