Extron Electronics FOX T USW 203 User Guide User Manual
Page 24
Command
ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Front panel lockout
Set front panel executive mode
X%
X
Exe
X%]
Enable or disable (default) the
front panel lockout (executive)
mode.
View front panel executive mode
X
X%]
View the front panel lockout
(executive) mode.
Plus mode transmission
Disable Plus mode transmission
81*0#
Plus0
]
Disable Plus mode transmission.
Enable Plus mode transmission
81*1#
Plus1
]
Enable Plus mode transmission
(default).
View Plus mode transmission
81#
X%]
View Plus mode transmission
setting.
HDCP authorized device (HDMI inputs only)
HDCP authorized device on
E
E
X1!
*1HDCP
}
HdcpE
X1!
*1
]
HDCP authorized device on for
input
X1!
(default).
HDCP authorized device off
E
E
X1!
*0HDCP
}
HdcpE
X1!
*0
]
HDCP authorization off for input
X1!
.
Query HDCP authorization status
E
E
X1!
HDCP
}
X^]
View the HDCP authorization
status.
HDCP status (HDMI inputs only)
Query HDCP status
E
I
X1!
HDCP
}
X1#]
Device name
NOTE: No blank or space characters are permitted. The first character must be a letter. The last character
cannot be a minus or hyphen.
Set unit name
EX1&
CN
}
Ipn
•X1&]
Set device name.
Set unit name to factory default
E•
CN
}
Ipn
•X1*]
Set device to default.
View unit name
E
CN
}
X1&]
View device name.
NOTE:
X%
= On or off
0
= off or not detected
1
= on or detected
X^
= HDCP authorization
0
= HDCP authorization off
1
= HDCP authorization on (default)
X1!
= Input selection
2
= HDMI (input 2)
3
= HDMI (input 3)
X1#
= HDCP status (HDMI only)
0
= no source device detected
1
= source detected with HDCP
2
= source detected but no HDCP is present
X1&
= Unit name
Text string up to 24 characters (
A
-
Z
,
0
-
9
,
-
)
X1*
= Extron device name
FOX-T-USW-203
FOX T USW 203 Universal Switcher • SIS Configuration and Control
18