Extron Electronics DMS 1600_2000_3200_3600 Setup Guide - Manual (Page 15)

20
DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Remote Contr
ol
NOTE: X1! = Address nnn . nnn . nnn . nnn
X1@ = DHCP 0 = off, 1 = on
Command ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
IP and serial port setup
Set IP address EX1! CI } Ipi X1!] Default: 192.168.254.254
Read IP address E CI } X1!]
Set subnet mask EX1! CS } Ips X1!] Default: 255.255.0.0
Read subnet mask E CS } X1!]
Set gateway IP address EX1! CG } Ipg X1!] Default: 0.0.0.0
Read gateway IP address E CG } X1!]
Set DHCP on or off EX1@ DH } Idh X1@] Default: 0 (Off)
Read DHCP on/off status E DH } X1@]
Command and Response Table for IP-Specific SIS Commands