Command and response table for sis commands – Extron Electronics DMS 1600_2000_3200_3600 Setup Guide User Manual
Page 12
15
DMS 1600, DMS 2000, DMS 3200, DMS 3600 • Remote Contr
ol
Command and Response Table for SIS Commands
Command
ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
NOTES:
•
Commands can be entered back-to-back in a string, with no spaces. For example:
1*1!02*02&003*003%.
•
The matrix switchers support 1-, 2-, and 3-digit numeric entries (
1*1!, 02*02&, or 003*003%).
Create ties
NOTES:
•
The ! tie command, the & tie command, and the % tie command can be used interchangeably.
•
The ! read tie command, & read tie command, and the % read tie command can be used interchangeably.
Tie input
X!
to output
X@
X!
*
X@
!
Out
X@
•
In
X!
•
All
]
Tie input
X!
to output
X@
.
Example (see Notes, above):
1*3!
Out03
•
In01
•
All
]
Tie input 1 to output 3.
Tie input
X!
to output
X@
X!
*
X@
&
Out
X@
•
In
X!
•
RGB
]
Tie input
X!
to output
X@
.
Example (see Notes, above):
10*4&
Out04
•
In10
•
RGB
]
Tie input 10 to output 4.
Tie input
X!
to output
X@
X!
*
X@
%
Out
X@
•
In
X!
•
Vid
]
Tie input
X!
to output
X@
.
Example (see Notes, above):
7*5%
Out05
•
In07
•
Vid
]
Tie input 7 to output 5.
Read output tie
X@
&
X!]
Input
X!
is tied to output
X@
.
Read output tie
X@
%
X!]
Input
X!
is tied to output
X@
.
Read output tie
X@
!
X!]
Input
X!
is tied to output
X@
.
NOTE: • = Space
X!
= Input number
00 – maximum number of inputs for your configuration (00 = untied)
X@
= Output number
01 – maximum number of outputs for your configuration