Extron Electronics DTP DVI 230 D User Guide - Manual (Page 19)

DTP DVI 230 D Transmitter and Receiver • Installation and Operation 13
Transmitter Power Indicator
a
Power LED — This two-color front panel LED lights to indicate signal and power status
as follows:
• Amber — The unit is receiving power but no signal on the DVI input.
• Green — The unit is receiving power and a signal is present on the DVI input.
Receiver Power Indicator
b
Power LED — This two-color front panel LED lights to indicate signal and power status
as follows:
• Amber — The unit is receiving power but no signal on the TP input.
• Green — The unit is receiving power and a signal is present on the TP input.
System Operation
After the transmitter, the receiver, and their connected devices are powered up, the system
is fully operational. If any problems are encountered, ensure all cables are routed and
connected properly.
NOTE: Ensure that the video source and display selected for the DDC are properly
connected to the transmitter and receiver pair, and that the transmitter, the receiver,
and the display have power applied before power is applied to the video source. If all
other devices are not turned on before the video source, the image may not appear.