Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER - Manual (Page 31)

ProLab 4000 Commissioning
31 ba75646e02 01/2010
3.7.3 USB-A interface (USB Host)
You can connect the following devices to the USB-A interface (USB
Host) at the ProLab 4000:
Operation at USB-A
(USB Host)
Connect the interface on the ProLab 4000 to the external device using
a cable with a USB-A and a USB-B plug.
The device is automatically recognized and is immediately operable.
Accessory Use
USB mouse Simple operation of the ProLab 4000 like a
PC
USB printer Simple output of data to the printer with the
key
USB memory Simple data backup on an external USB
medium
USB card reader Simple data backup on an external memory
card
USB keyboard Input of text with the keyboard
USB barcode reader Input of data such as sample designations
using a barcode.
Data input using the barcode reader is
always possible whenever it is possible to
input data via the keyboard.
USB hub (USB 2.0) Multiplication of the number of USB-A inter-
faces USB Hostfor simultaneous operation
of several USB devices