Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER - Manual (Page 171)

ProLab 4000 Recorder
171 ba75646e02 01/2010
12.5.3 Defining and activating limit values
With the limit values you define the measured values at which the curve
of the measurement developing is displayed gray if the measured are
below or above the limits.
Thus measured values below or above the limits can easily be recog-
nized.
1 Open the recorder menu, Settings...Settings....
The Recorder settings window pops up.
2 Select the Measured value register to define the limit values for
the measured value.
3 Mark the selection field, Switch on limit value monitoring.
4 Enter the upper and lower limit value.
5 Select the Temperature register to define the limit values for
the measured value.
6 Mark the selection field, Switch on limit value monitoring.
7 Enter the upper and lower limit value.
8 Use [OK] to accept the new settings and close the dialog box,
Recorder settings.
The new settings are active.
or
Select another register to make further settings.