Xylem ProLab 1000 BENCH TOP pH METER - Manual (Page 77)

ProLab 1000 Maintenance, cleaning, disposal
77 ba75576e04 01/2011
5 Maintenance, cleaning, disposal
5.1 Maintenance
The only maintenance activity required is replacing the batteries.
Note
For maintenance of the electrodes refer to the relevant operating
manuals.
Replacing the batteries
1 Using a screw driver, unscrew the screws (2) of the lid of the
battery compartment.
2 Open the battery compartment (1) on the underside of the
meter.
3 Remove the four batteries from the battery compartment.
4 Place four new batteries (type Micro AAA) in the battery
compartment.
5 Close the battery compartment (1).
The date (day) flashes on the display.
6 Using a screw driver, tighten the screws (2) of the lid of the
battery compartment.
7 Set the date and time (see page 25)
1
2