Xylem ProLab 1000 BENCH TOP pH METER - Manual (Page 73)

ProLab 1000 Operation
73 ba75576e04 01/2011
4.8.3 Options for data transmission
Via the RS232 interface, you can transmit data to a PC or external
printer. The following table shows which data is transmitted to the
interface in which way:
Note
The following rule applies: Except for the menus, the display content is
generally downloaded to the interface with (displayed
measured values, measurement datasets, calibration records).
Data Control Operation / description
Current
measured values
of the connected
sensor Manual z With .
z Simultaneously with every
manual storage process (see
page 62).
automatic, at
intervals z With
_
>. Then you
can set the transmission
interval.
z Simultaneously with every
automatic storage process
(see page 63).
Stored measured
values Manual z Displayed dataset:
with after recall
from data storage.
z All datasets according to the
filter criteria via the Output to
RS232/USB function.
For details, see page 65.
Calibration
records Manual z Calibration record of a sensor
with (after calling
up from the data storage or at
the end of a calibration
procedure).
z after calling up from the data
storage via the Output to
RS232/USB function.
For details, see page 68.
automatic z For the respective sensor at
the end of a calibration
procedure.