Xylem ProLab 1000 BENCH TOP pH METER - Manual (Page 50)

Operation ProLab 1000
50 ba75576e04 01/2011
Note
After a five-point calibration the calibration procedure is automatically
terminated. The menu item Terminate with ... is not displayed.
Note
The calibration line is calculated by linear regression.
18 Switch to measurement of the next buffer with
▲><▼> to select
the Terminate with ... menu item and confirm with
i]).
You have the following options:
z Accept the new calibration values with
Subsequently, the calibration record is displayed and
downloaded to the interface at the same time.
z To switch to the measured value display without accepting
the new calibration values, press or .
[ i] Buffer value = 4.010
[ i] U = 184.0 mV
[ i] Temperature = 24.8 °C
Terminate with ...
Terminate stability control
pH