Xylem MY CONNECT HMI display - Manual (Page 4)

MANUAL
HMI display
4
Introduction
Thank you for choosing the MJK HMI Display unit.
MJK HMI Display are easy to install and operate, to get the most of the HMI Display, MJK recommends, reading this
manual to get familiar with the details regarding the touch display. The equipment must be treated and used
according to the guidelines provided by MJK Automation ApS, to ensure a stable operation and accurate
measurements.
Liability
MJK Automation ApS is liable according to the national regulations of Danish law on product liability. However, the
liability is reduced to coverage of MJK Automation ApS public liability insurance of products. Unless specifically
mentioned, MJK Automation ApS is not liable for loss of profits and working deficits or other indirect losses caused by
the product.
Changes
As our products are developed continuously, we reserve the right to make any alterations without prior notice.
Trademarks & acknowledgements
Mµ Connect, Connect, MagFlux, Chatter, SuSix, Oxix, pHix and Shuttle are ® registered trademarks for MJK
Automation ApS, Denmark. Expert and Instrument Link are ™ trademark for MJK Automation ApS, Denmark.
VLT® is registered trademark for Danfoss A/S.
Other trademarks are property of their respective owners.
M JK Au tomation ApS is a Xylem bran d.
Område Telefon e-mail
Europa +45 45 56 06 56 [email protected]
Danmark +45 45 56 06 56 [email protected]
Norge +47 69 20 60 70 [email protected]
Holland +31 251 672171 [email protected]