Xylem MY CONNECT HMI display - Manual (Page 21)

MANUAL
HMI display
21
Level Element
Menu Item Description
The Level element works as a shortcut to SETPOINTS>Pump Settings, in which e.g. the start/
stop levels can be adjusted.
Level,
Left area The left bar illustrates the actual level of the well.
If the level is acceptable the color will blue.
If the level is below minimum requirements or above acceptable level the color will switch to orange
Level,
Right Area The start/stop levels AND the high/low alarm limits is illustrated in this bar.
Orange illustrates the high/low alarm levels.
Grey illustrates the start and stop levels.
Blue illustrates the acceptable levels.