Xylem iRIS-CAM Wastewater Security Camera - Manual (Page 6)

i Quest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 957 8160 Fax: +64 7 957 8162 Email: [email protected] 4
3 Installation
3.1 Mounting
This can be achieved with the use of the four M6 Allen Key® bolts or other suitable hardware such as
wood screws. The diagram below shows the overall dimensions and position of the mounting holes for the
IRIS-CAM. The correct orientation is shown in the diagram, where the engraved writing is the right way up.
The cable extends from the left side of the enclosure when viewing the camera from the front.
Due to the lens’s small aperture it can be susceptible to image quality degradation due to droplet of water
(creates a second lens). To minimize the effects, provide the camera lens with a rain shield; position the
camera so that it points down and away from prevailing weather.