beautypg.com

Global water – Xylem 6308DT INDUSTRIAL DISSOLVED OXYGEN TRANSMITTERS User Manual

Page 5

background image

Global Water

800-876-1172

globalw.com

- 5 -

III) Using the Global Water Model 6308DT

a) Front Panel

1. The [MODE/-] key.

(a) In Normal mode, this key will change the DO display to DO % or

DO ppm.

(b) In Calibration / Setting mode, this key will move to the next digit of

the current active parameter.

(c) In Calibration/ Setting mode, pressing this key for 2 seconds will

move you back to the previous parameter.

2. The [CAL/VIEW] key.

(a) In Normal mode, the display will go to Calibration / Setting mode if

you press this key for about 2 seconds


(b) During Calibration/Setting mode, this key will switch to the next

available Calibration/Setting page. Pressing this key at the last
Calibration / Setting page will return the user to the Normal mode.