Xylem 6308DT INDUSTRIAL DISSOLVED OXYGEN TRANSMITTERS - Manual (Page 10)

Global Water
800-876-1172
• globalw.com
- 10 -
You can change any blinking options or digit by pressing the [ ] or [
] keys.
For options in digit format you need to press the [ MODE/-] key to move to the
next digit. If you are satisfied with the selection you made you need to press the
[ ] ENTER key to save the changes and move to the next option. If you do not
need to change the current blinking option just press the [ ] ENTER key to
move to the next selection.
c) Check Password page
You will only see this page if the unit is password locked. To change any settings
or calibration you need to unlock the system to remove the "PASSWORD
LOCKED" message. You need to enter the correct 4-digit number on the
"ENTER PASSWORD" input. You can still view all the pages of
Calibration/Setting mode if the system is password locked by just pressing the
[CAL/VIEW] key on this page. If the unit is "PASSWORD LOCKED" going to
Calibration/Setting mode will not affect the function of the relays.