YSI TruLab 1310P - Manual (Page 57)

TruLab pH 1310 Printer (only TruLab pH 1310P)
ba76156e01 03/2014
57
10.5 What to do if... / printer
Integrated printer
does not print
Printer operating -
paper not being
printed
Integrated printer
prints automatically
Cause Remedy
– Printer switched off
(LED flashing)
– Switch on the printer
(LED illuminated)
– No power pack connected – Connect the power pack
– USB cable connected – Disconnect the USB cable from the
meter
– Function "automatic storing at
intervals" with long intervals is
switched on
– Switch off the function (see section
8.2 A UTOMATIC STORAGE AT INTER -
VALS , page 48)
– No paper available – Insert a roll of paper
Cause Remedy
– Paper inserted the wrong way up – Turn the roll of paper around and
insert it with the other side upwards
Cause Remedy
– The function "Automatic storage
at intervals" or "Transmit data
automatic at intervals" is
switched on
– Switch off the function (see section
8.2 A UTOMATIC STORAGE AT INTER -
VALS
, page 48 or
section 9.1 O PTIONS FOR DATA
TRANSMISSION , page 53)