5 measuring, 1 measuring operation, 2 factors affecting the measured value – YSI IQ S ENSOR N ET VARiON Plus 700 IQ User Manual
Page 45: Measuring -1, Measuring operation -1, Factors affecting the measured value -1, 5measuring
VARiON
®Plus
700 IQ
Measuring
5 - 1
ba76000e01
01/2012
5
Measuring
5.1
Measuring operation
Note the data given in section 9.2 A
the minimum immersion depth of the sensor (> 50 mm with mounted
protective hood).
Note
To keep the sensor clean, we recommend to use the CH cleaning head
(see chapter 7 R
5.2
Factors affecting the measured value
Caution
Greases, oils, certain tensides and similar substances can
shorten the operational lifetime of the electrodes. Therefore, they
should not be present in the test sample.
For measurement with the VARiON
®Plus
700 IQ the following
influencing variables can be important, depending on the measured
parameter:
Note
The effects of influencing variables on measurement and
compensating actions are described in detail in the YSI primer, I
ON
SELECTIVE
MEASUREMENT
IN
ONLINE
ANALYSIS
.
Measured parameter
Influencing variable
Ammonium
pH value
Potassium ions
Nitrate
Chloride ions