YSI IQ S ENSOR N ET VARiON Plus 700 IQ - Manual (Page 20)

Commissioning VARiON
®Plus
700 IQ
3 - 8 ba76000e01 01/2012
3.4.3 Connecting the sensor to the IQ S ENSOR N ET
Connection cable The SACIQ sensor connection cable is required to connect the sensor.
Information on this and other IQ S
ENSOR N ET accessories is given in
the YSI catalog and on the Internet.
Note
Do not suspend the sensor on the sensor connection cable. Use an
armature or electrode holder. Information on this and other IQ S
ENSOR
N ET accessories is given in the YSI catalog and on the Internet.
Note
How to connect the SACIQ sensor connection cable to the
IQ S
ENSOR N ET is described in chapter 3 I NSTALLATION of the
IQ S ENSOR N ET system operating manual.
Are the plug
connections dry?
Before connecting the sensor and sensor connection cable, make sure
that the plug connections are dry. If moisture gets into the plug
connections, first dry the plug connections (dab them dry or blow them
dry using compressed air).
Connecting the sensor
to the sensor
connection cable
Fig. 3-5 Connect the sensor
1 Take the protective caps off the plug connections of the sensor
and the SACIQ sensor connection cable, and keep them safe.
SACIQ
1
2