YSI IQ S ENSOR N ET VARiON Plus 700 IQ - Manual (Page 22)

Commissioning VARiON
®Plus
700 IQ
3 - 10 ba76000e01 01/2012
3.5 Settings
3.5.1 General information
Automatic electrode
recognition
The VARiON
®Plus
700 IQ software automatically recognizes the built-
in electrodes and checks the equipment for validity. Depending on the
equipment, the following sensors are displayed in the list of sensors:
Note
Manually, you can also have the potassium electrode displayed as the
extra sensor, VARiON K.
Carrying out settings With , switch to the main settings menu from the measured value
display. Then navigate to the setting menu (setting table) of the sensor.
The exact procedure is described in the relevant IQ S
ENSOR N ET
system operating manual.
The setting tables of the sensors are described in the following
chapters.
Sensor overlapping
settings
Certain settings are sensor overlapping and can be made in any one of
the setting tables. The setting is used by all sensors.
The sensor overlapping settings are:
 Temperature mode (°C/°F)
 Temp. adjustment
Sensor Designation
VARiON
®Plus
700 IQ Ammonium sensor VARiON A
VARiON
®Plus
700 IQ Nitrate sensor VARiON N
Sensor Designation
VARiON
®Plus
700 IQ potassium sensor VARiON K