YSI IQ S ENSOR N ET MIQ/C6 - Manual (Page 13)

MIQ/C6 Settings
4 - 1 ba76033e01 01/2012
4 Settings
The MIQ/C6 module has six current outputs that supply a current that
depends on the measured value.
On the terminal, you can:

assign names to the outputs (see section 4.1).
 link outputs with sensors (see section 4.2)

delete links of outputs with sensors (see section 4.3)
 adjust outputs (see section 4.4)

check the condition of the outputs (see section 4.5)
Note
The general operating principles are given in the system operating
manual or in the component operating manual of the terminal
components.