YSI IFL 700 IQ - Manual (Page 11)

IFL 70x IQ Commissioning
3 - 1 ba76129e01 10/2012
3 Commissioning
3.1 IQ S
ENSOR
N
ET
system requirements
Software statuses of the
controller and terminal
components
The operation of the IFL 70x IQ requires the following software ver-
sions in the IQ S
ENSOR N ET :
3.2 Scope of delivery
 Sludge level sensor IFL 700 IQ or IFL 701 IQ
 Operating manual
3.3 Installation
3.3.1 General information
NOTE
Sharp objects can damage the ultrasonic transducer. Please be care-
ful, especially when handling sharp tools, when cleaning and during
transport.
NOTE (only IFL 700 IQ)
If the sensor is connected to the IQ S
ENSOR N ET , the mechanical wiper
may start moving unexpectedly. Make sure that the swivel range of the
wiper is always free. Only put the sensor down on its leg supports on a
flat surface with the ultrasonic transducer pointing downward.
 MIQ/MC2 Controller software: Version 3.35 or higher
 MIQ/TC 2020 XT Terminal software: Version 3.35 or higher