YSI IFL 700 IQ - Manual (Page 29)

IFL 70x IQ Maintenance, cleaning, accessories
5 - 3 ba76129e01 10/2012
Cleaning
NOTE
Carefully clean the wiper of the IFL 700 IQ from outside.
5.3 Accessories
1 Switch on the maintenance condition for the sensor.
2 Pull the sensor out of the sample.
3 Get rid of any coarse impurities on the sensor (brush it off in a
bucket of tap water, wash it down with a hose or wash it off with
a cloth).
4 Clean the sensor shaft and the surface of the ultrasonic trans-
ducer as explained in the point C
LEANING AGENTS , page 1.
5 Then, rinse it thoroughly with tap water.
Information on IQ S
ENSOR
N
ET
accessories is given in the
YSI catalog and on the Internet.