Xylem HandyLab 700 - Manual (Page 33)

33
Error Codes and Device Messages
Sensoface provides information on the
sensor condition (maintenance request).
Measurement can still be performed.
After a calibration, the corresponding
Sensoface icon (friendly, neutral, sad) is
shown together with the calibration data.
Otherwise, Sensoface is only visible in
measuring mode.
The most important error messages and
“Sensoface” info messages are shown on
the inside of the protective cover.
A complete list of messages and their
meanings is provided in the following
tables.
Error messages are indicated as “ERROR …” on the display. Information on
the sensor condition is indicated by the “Sensoface” icon (friendly, neutral,
sad) possibly accompanied by an info message (“INFO …”).
Example of a “Sensoface” message:
INFO 1 (cal timer expired) Example of an error message:
ERROR 8 (identical calibration media)