Xylem HandyLab 700 - Manual (Page 26)

26
Start-Up
Switching On the Meter
When you have connected the sensor, you can switch the me-
ter on by pressing the on/off or meas key.
When the meter is switched on with the on/off key, fi rst a self
test is performed and then the calibration data and settings are
displayed before the meter switches to measuring mode.
When the meter is switched on with the meas key, it immedia-
tely switches to measuring mode.
Depending on the connected sensor and the specifi c
measuring task, several steps for confi guration and calibration
must be performed as described on the following pages.
Icons
Important information about the state of the device:
Error message
Battery char-
ging level
Sensor
condition
Memosens sensor
Temperature
detection
(sensor,
separate or
manual)
Date
Process
variable
Time