Xylem CG 843 - Manual (Page 53)

Operation
121
16 Set the current year by pressing < ▲ > < ▼ >.
17 Confirm with .
The hours flash on the display.
18 Set the current time by pressing < ▲ > < ▼ >.
19 Confirm with .
The minutes flash on the screen.
20 Set the current time by pressing < ▲ > < ▼ >.
21 Confirm with .
The instrument changes automatically to the pH
measuring mode.
1 Press and hold down the key.
2 Press the key.
The measured values appear with the higher resolu-
tion on the display, e.g. pH = 4.012.
3 Press the key and key again.
The measured values with the lower resolution ap-
pear on the display, e.g. pH = 4.01.
Adjusting the reso-
lution