Xylem CG 843 - Manual (Page 26)

Operation
94
Calibration protocol The calibration protocol contains the calibration data of the
current calibration. You can call up the calibration protocol
by outputting the data storage (section 4.4.3).
Note
You can automatically print out a calibration protocol after
the calibration. To do so, connect a printer according to sec-
tion section 4.5.3 before the calibration. After a valid calibra-
tion, the protocol is printed.
Sample printout:
CALIBRATION PROTOCOL
02.03.99 14:19
Device No.: 12345678
CALIBRATION pH
Cal Time: 01.03.99 / 15:20
Cal Interval: 7d
AutoCal DIN Tauto
Buffer 1 1.679
Buffer 2 4.008 *
Buffer 3 6.865
Buffer 4 9.180 *
C1 174.1mV 25.0°C
C2 -133.3mV 25.0°C
S1 -59.4 mV/pH
ASY1 - 4 mV
Probe: +++