Xylem CG 843 User Manual

Page 41

Operation

109

Note
The

AutoStore

function is interrupted if you perform other

functions, e.g. output data storage.
After completing the other function, the

AutoStore

function

continues. However, as a result, gaps can occur in the
recording of the measured values.

Switching off the

AutoStore

Switch off the

AutoStore

function by:

Setting the storage interval (Int 1) to OFF or

Switch the pH meter off and on again.

5 As soon as all 200 memory locations are full, the

AutoStore function is terminated (Int 1 = OFF).
If too few storage locations are available for your
measurements:

– backup the data storage (see 110) and

– clear the data stored (see 113).

6 Confirm with .

The prompt for the I.D. number appears on the dis-
play.

7 Press <

▲

> <

▼

> to set the required I.D. number.

8 Confirm with .

The instrument changes to the pH measuring mode
and starts the measuring and storage procedure.

AutoStore

flashes on the display.