Xylem CG 843 - Manual (Page 40)

Operation
108
4.4.2 Switching on AutoStore (Int 1)
The storage interval (Int 1) determines the time interval
between automatic storage processes.
After the time interval expires, the current data record is
transmitted to the data storage and to the RS interface.
Setting the storage
interval
The storage interval (Int 1) is set to OFF in the factory.
Thus, the
AutoStore function is switched off.
To switch the function on, set up a time interval (5 s, 10 s,
30 s, 1 min, 5 min, 10 min, 15 min, 30 min, 60 min):
1 Press and hold down the key.
2 Press the key. Int.1 appears on the display.
3 Press the < ▲ > < ▼ > keys to set up the required time
interval between storage processes.
4 Confirm with .
The number of free memory locations appears on the
display.