4 operation, 1 switching on the meter, Operation – Xylem Lab 860 User Manual
Page 17: Switching on the meter, 4operation

Lab 860
Operation
17
ba75554e05
01/2010
4
Operation
4.1
Switching on the meter
Note
The meter has an energy saving feature to avoid unnecessary battery
depletion during battery operation.
The energy saving feature switches off the meter if no key was pressed
during the specified interval (setting the switch-off interval, see
page 44).
The energy saving feature is not active:
z if the meter is supplied via the power pack or the USB interface
z if a PC is connected (with communication cable to RS232 interface)
z if the printer cable is connected (for external printers).
1
Place the meter on a flat surface and protect it from intense
light and heat.
2
Press the
key.
A display test is briefly displayed.
Subsequently, the meter switches to the measuring mode
(measured value display).