Xylem IM098 AQUAVAR Model 56 Controller - Manual (Page 32)

➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
➔
Operator Custom Features and Displays
Settings at the Inverter Menu
This message is shown during the connecting, when
autoconnecting is enabled.
The actual input value (%) and the actual output
frequency (Hz) are displayed.
Set required pressure with the buttons and .
To enter the submenu “Parameter”, press button.
Settings at the Submenu-Parameter
IMPORTANT
Before entering the secondary menu these instructions must be read carefully to prevent incorrect
settings which will cause malfunction.
After entering the “Submenu-Parameter” the display
will change to:
Set ‘Password 0066’ by pressing and
Confirm by resetting ➔ and the first window of the
submenu is shown
Pressure Change You can decide between and
(Enabled or Disabled). If the pressure setting
is enabled, you can change the pressure on the
AQUAVAR Model 56 Controller head with decrease
and increase.
Auto Start You can select between Disabled
and Enabled. Auto start Enabled means that
the pump starts again automatically after an
interruption of the power supply (power
failure). If Auto start Disabled is set, the pump has to
be restarted manually after a power
failure, by pressing and .
27
SCAN
CONNECTION
PRESS X.X PSI
SPEED X.X HZ
PRESSURE
XX.X PSI
PARAMETER
PASSWORD
0000
PASSWORD
0066
CHANGE PRESSURE
ENABLED
AUTO START
ENABLED
CHANGE PRESSURE
ENABLED