Xylem IMVIC R01 Model VIC Vertical Industrial Turbine Can Pumps - Manual (Page 2)

2
Foreword
This manual provides instructions for the Installation, Operation, and Maintenance of the Goulds Water
Technology Vertical Industrial Turbine Type Can Pumps. This manual covers a standard product. For special
options, supplemental instructions are available. This manual must be read and understood before
installation and start-up.
This instruction manual covers several different pump models. Most assembly, disassembly, and inspection
procedures are the same for all the pumps. However, where there are differences, these differences will be noted
within the manual. The design, materials, and workmanship incorporated in the construction of the Goulds
Water Technology VIC pumps makes them capable of giving long, trouble-free service. The life and satisfactory
service of any mechanical unit, however, is enhanced and extended by correct application, proper installation,
periodic inspection, condition monitoring and careful maintenance. This instruction manual was prepared
to assist operators in understanding the construction and the correct methods of installing, operating, and
maintaining these pumps.
The information contained in this book is intended to assist operating personnel by providing information on the
characteristics of the purchased equipment. It does not relieve the user of their responsibility of using accepted
engineering practices in the installation, operation, and maintenance of this equipment.
Goulds Water Technology pumps shall not be liable for physical injury, damage, or delays caused by failure
to observe the instructions for installation, operation, and maintenance contained in this manual.
Warranty is valid only when genuine Goulds Water Technology pumps parts are used.
Use of the equipment on a service other than stated in the order will nullify the warranty, unless written approval
is obtained in advance from Goulds Pumps.
For information or questions not covered in this manual, contact Goulds Water Technology at (806) 743-5700.
THIS MANUAL EXPLAINS :
• Proper Installation • Pump Overhaul
• Start-up Procedures • Trouble Shooting
• Operation Procedures • Ordering Spare or Repair Parts
• Routine Maintenance
Foreword
Owner’s Information
Pump Model Number:
Pump Serial Number:
Motor Model Number:
Motor Serial Number:
Dealer:
Dealer Telephone:
Purchase Date:
Installation Date: