Acer Altos G510 - Manual (Page 65)

53
To remove the HDD cable cage
1 Turn off the system and all the peripherals connected to it.
2 Unplug all cables from the power outlets.
3 Place the system on a flat, stable surface.
4 Remove the front bezel, inner front panel, side panel, and air
baffle.
5 Disconnect the SCSI cable and the SCSI HDD power cable from the
hard disk drive.
6 Loosen the four thumbscrews that secure the non-Hot Plug cable
cage to the chassis (1).
7 Slightly pull out the cage from the chassis (2).
8 Remove the HDD cable cage from the chassis.
BB!H621!.!FO/cppl!!Qbhf!64!!Uivstebz-!Kvof!23-!3114!!2;34!QN