Acer Altos G510 - Manual (Page 107)

95
Reset
Configure Data BIOS setup stores the configuration data of
Plug and Play devices in NVRAM (Non-vola-
tile Random Access Memory).
When this parameter is set to Yes, current
data is deleted and a new set of informa-
tion is created during the next system
bootup.
No
Yes
PCI Latency
Timer Sets a timing parameter for the PCI bus. 64
USB Function Enables the system’s USB ports Enabled
Disabled
Legacy USB
Support Enable this parameter when you intend to
use a USB device and are using a non-Plug
and Play operating system, such as DOS. Disabled
Auto
ARMD
Emulation Type Selects the ARMD (ATAPI Removable
Media Device) emulation type. Hard Disk
Auto
Floppy
Parameter Description Option
BB!H621!.!FO/cppl!!Qbhf!:6!!Uivstebz-!Kvof!23-!3114!!2;34!QN