Connecting peripherals, To connect the ps/2 keyboard – Acer Altos G510 User Manual
Page 34
2 System setup
22
Connecting peripherals
The system unit, keyboard, mouse, and monitor constitute the basic
system. Before connecting any other peripherals, connect these basic
peripherals first to test if the system is running properly. Instructions
on how to connect a printer is also described here, refer to page 25.
Note: Unless otherwise indicated, all illustrations shown in this
section show the Altos G510 server chassis.
To connect the PS/2 keyboard
Plug the keyboard cable into the PS/2 keyboard port
(purple
port) located on the rear panel of the server.
BB!H621!.!FO/cppl!!Qbhf!33!!Uivstebz-!Kvof!23-!3114!!2;34!QN