Acer Altos G510 - Manual (Page 123)

111
To set a Supervisor/User password
1 Use the up/down keys to highlight a password parameter
(Supervisor Password or User Password) then press Enter.
A password box will appear.
2 Type a password then press Enter.
The password may consist of up to six alphanumeric characters
(A-Z, a-z, 0-9).
3 Retype the password to verify the first entry then press Enter
again.
After setting the password, the system automatically sets the
chosen password parameter to Installed.
BB!H621!.!FO/cppl!!Qbhf!222!!Uivstebz-!Kvof!23-!3114!!2;34!QN