Display over usb, Introduction, How to start dousb – Acer P7203B User Manual

Page 44

Text mode
Original mode

ish

Display over USB

Introduction

Display over USB(DoUSB) projection is one easy function to project NB/PC screen
on projector through one USB cable (USB type A to miniUSB) without installing
any driver.

If enduser un-plug the USB cable, projector will stop the projection and return
to standby status.

How to start DoUSB

Step 1: Adjust projector source to USB B, you will find below projecting screen.

Step 2: Connect the USB cable to both Projector and NB/PC, plug the mini USB

to Projector side and type A host to NB/PC side.

Step 3: Start to display NB/PC's screen through USB automatically.

Step 4: Unplug the USB cable to stop displaying over USB.

Note: only support one NB to one projector (1-to-1 screen
projection) by DoUSB connection.